Yale Smart Door Lock Not Working (Troubleshooting Guide)
The practice of using traditional locks and keys to secure one’s home is becoming outdated, as numerous individuals now prefer to adopt technological advancements by utilizing smart locks.
It is elementary to misplace keys, or someone can steal them with ill intent.
For increased security, you can even install a camera at the doorbell. You will know who exactly is at your doorstep with no surprises.
Like anything in this world, there’s always a catch to using smart locks.
Your smart lock will malfunction from time to time for myriad reasons. This guide will help you sort your issues in a flash.
Yale Smart Door Lock Not Working (Troubleshooting Guide)
When your Yale smart lock starts to have issues, the common causes could be: the batteries are out of charge, you are not using the latest firmware, or the wifi connection is unstable.
Before doing an in-depth analysis, ensure the intelligent lock is connected to your device via Bluetooth, and it has access to a strong wifi network.
Setting up a Yale Lock
You are given the option to choose a digital keyless locking method by Yale makers.
These are: by use of a smartphone, fingerprint, or a keypad.
A Yale smart door lock has two in-built modes; the default (normal) mode and the master mode.
In default mode, anyone with the passcode can configure the lock’s features. On the other hand, only the user who has the master pin can do the configuration.
How to set a pin:
- Tap the (i) button for registration.
- You are prompted to enter a pin with 4-10 numbers.
- Tap the (i) button again for confirmation.
Common Yale Smart Door Lock Concerns and Their Solutions
Entry Passcode Not Unlocking
The passcode usually ranges between 4-8 numbers. Make a note of the buzzes given off by the keypad.
When you key in an incorrect code, the door won’t unlock, and the keypad gives off one buzz. Try again, paying attention to the code.
Two buzzes mean the keypad doesn’t convey any signal to the lock.
Try rebooting the lock by removing the battery and putting it back. If the problem persists, it is time for a reset.
This is how to do a reset:
- Run the Yale app and select keypad settings.
- Make sure the phone and lock are in range, then tap the disconnect keypad icon.
- A code is sent to your email for a physical reset.
- Manually key in this code and remember to update the entry codes.
Fingerprint Not Recognized
You may need to remember to clean your hands after manual labor or when the weather’s hot and you are sweaty.
In such cases, the fingerprint recognition system will not register the identity.
Always ensure both your hands and the recognition surface are clean.
The other cause may be that you still need to place the finger in the required position. Be keen to do it diligently to avoid such a scenario,
Firmware Not Upgrading
For your Yale smart door lock to work optimally, it must operate with the latest firmware.
The updates are supposed to download automatically when a new release is phased out.
If your smart lock doesn’t upgrade automatically, take the following steps:
- Sign in to your Yale app on the preview page.
- Select the gear image on the page.
- Check for new firmware by tapping the cloud upgrade on the device info page.
- Download the upgrade and update the firmware.
Insistent Beeping Sound and LED Flashing Red
Whenever the ring surrounding your keypad turns red, it indicates that the batteries need to be replaced.
The beeping sound means the batteries are exhausted, and the lock will be out of commission soon.
Make sure to replace the batteries regularly. Do not use rechargeable batteries because they lower the lock’s life cycle.
Lock Not Responding After Battery Change
Sometimes we must remember to check the batteries’ polarity and insert them willy-nilly. If this happens, your Yale smart lock will not power up.
Open the battery case to ensure the positive (denoted by +) and negative (- sign) terminals are slotted in their rightful places.
It is also essential to change all batteries at the same time.
You replace two of the four batteries in an intelligent lock. The remaining two batteries will drain the new ones causing unmitigated damage to your Yale smart lock.
Adding Guests To Your Yale Account
Isn’t it amazing how you can let a loved one into your home by just pressing a button, no matter where you are?
You only need to send them virtual keys and an invite to download the Yale smart lock app on their device.
Frequently Asked Questions
Can My Smart Lock Be Easily Hacked?
The simple answer is yes.
Since your smart lock works with the same principle as a computer, hackers can gain access through your phone or Bluetooth.
Manufacturers are racing ahead of hackers who seem to be giving them a run for their money.
No matter what measures are put in place, they will gain access if a hacker is determined.
To be on the safe side, upgrade the firmware regularly, activate the two-key feature, and only buy locks with the highest encryption system.
What Is a Lock Out Mode?
After unsuccessfully trying to enter the entry code 5 times, the intelligent lock assumes this is unauthorized access and will go into lock-out mode.
You can only open the door with a Master Pin.
Does My Warranty Cover Every Accident?
A Yale bright door lock is not designed to be weatherproof, and this point is insisted upon purchase.
You are on your own if you willingly clean the lock with a damp rag and expose it to unnecessary heat.
Other instances include; trying to modify the lock yourself, neglecting and letting the lock rust, doing major repairs without consulting an expert, and spilling food substances on the lock.
Final Thoughts
In a nutshell, there are some issues on your Yale smart lock you can solve yourself and not needlessly call for a locksmith.
Knowledge is power; hopefully, this article provides insight into troubleshooting yourself.
But, if the issues persist, feel free to contact Yale customer support for professional help.
