How to Fix Bush TV with No Sound

It’s Friday evening and you’re settled on the couch, all ready to indulge in your go-to TV show. But as you turn on your Bush TV, you realize there’s no sound.

In dismay, you try to work out what the problem could be. 

Smart televisions are prone to malfunctions, such as losing their audio.

That said, a wide range of factors can cause this issue, and thus it can be frustrating when you don’t realize the actual problem first.

This article gives an in-depth outlook on the different aspects that may cause your Bush TV to lose its sound and ways of resolving this problem. 

How to Fix Bush TV with No Sound?

How to Fix Bush TV with audio problems

When your Bush TV is on but without sound, it could be a problem with audio settings, faulty cables, or external device interference.

A quick fix is to unplug and plug back the power cord, adjust the volume settings or update software. However, a complex issue may require a factory reset or an expert’s touch to fix it.

Reasons Why Your Bush TV Has No Sound

If your TV doesn’t have sound, it can be frustrating. You might wonder what the problem is and if there is a fix.

There are a few reasons why your TV’s sound might not be working;

  • Low or muted volume on the TV or the external speakers
  • Faulty internal circuit board
  • A bad power supply unit
  • Incorrectly configured audio settings
  • Interference from nearby devices
  • Outdated software
  • Hardware problems like external speakers

8 Ways to Fix Your Bush TV with No Sound

There are several basic fixes to a Bush TV with no sound; here are a few checks.

Adjust TV volume settings

Check if the TV volume is set to zero or muted. Unmute your Bush TV if it’s muted.

Alternatively, increase the volume above zero by using the up and down buttons on your Bush TV remote.

Adjust the volume of the connected media device, like the streaming player and satellite box.

Unplug and reconnect the power cord

This is the easiest and most common way of fixing a Bush TV with no sound.

Unplug from the socket and wait for 1 minute before plugging back in. This clears any issue with interference from nearby electronic devices.

Ensure the cables are securely connected

If the cables connecting to your TV are secured connected, disconnect and reconnect again for best results.

Check to ensure the wires are in perfect condition, not frayed, and plug in securely.

Check external audio

Switch the external sound system, like the sound bar or surround sound, with the default speakers to test where the issue lies.

If they produce sound, the external speakers are the problem. Get them fixed; if not, it’s the Bush TV.

Check the signal

The signal is the issue if the audio works with a different feed. Check what is transmitting feed to your TV and switch to something different for testing.

For instance, switch to WIFI or connect a PC and project to the TV if using a cable.

Perform a software update

Check if your Bush TV is running on the latest software version.

Software updates install automatically when your TV is connected to the internet. However, the process may sometimes get disrupted, making your Bush TV run on outdated software.

Resolve this issue by updating the software by connecting to reliable internet or manually via the settings option.

Steps for manual update include;

  • Press the V key on your remote
  • Click systems tab
  • Check for updates in the drop-down menu
  • The TV will look for updates, if any, and confirm the installation
  • Restart the TV, and your problem is solved

Factory reset

Revert your Bush TV to factory setting if all the above hacks fail. This will erase all data eliminating any software problems.

  • Select Settings on your TV remote
  • Click system
  • Click reset & Admin
  • Select reset TV to factory setting
  • Press OK and wait for the TV to turn off

Suppose you don’t have a remote; press and hold the power button for at least 10 seconds. This should turn off the TV, reboot it, and factory reset it.

Check for an Active Warranty

How to Fix Bush TV with No Sound

If the issue persists after trying the above fixes, contact Bush TV customer service.

Describe the problem, and the team will replace or repair the TV if it’s covered under an active warrant.

Frequently Asked Questions (FAQs)

What should I do if my TV audio problem is recurrent?

An intermittent audio problem stems from a poor connection or signal. Try switching ports and cables; the TV is the issue if that doesn’t work.

Check the settings or unplug and plug back the power cord. This should solve the issue.

Can I factory reset my Bush TV without a remote?

You can reset your Bush TV without a remote by powering it on first. Toggle to settings>General>Reset.

Alternatively, directly plug in a keyboard at the back of your TV and navigate the reset settings.

How do I fix a damaged in-built TV speaker?

The internal speaker is likely broken if you have an older Bush TV with a built-in speaker.

If so, replace the internal speaker with an external speaker or other sound system. Alternatively, use headphone jacks in place if buying speakers is an expense.

My Bush TV audio won’t turn on after a power outage; what’s the issue?

The issue could be an insufficient power supply or fried internal components due to electric shock.

Unplug it, pressing the button for about 15 seconds, and wait 2 minutes to plug it back and power it on.

This should work; if not, check the surge protectors, change a power source or consult an expert.

Final Thoughts

Although working out what could be causing your Bush TV’s inbuilt speakers to act up and coming up with a solution seems tedious, it’s cost-effective.

This is because calling in an electrical each time it happens is quite pricey.

Therefore, follow the steps indicated above and fix your TV’s sound system in the comfort of your home. 

Similar Posts